Siamcafe Community
หมวดหมู่สี่ => InternetCafe Software => ข้อความที่เริ่มโดย: jasda2003 ที่ ธันวาคม 12, 2005, 09:27:44 am
-
(http://img234.imageshack.us/img234/1373/iexplorer280821rd.jpg)
เป็นการเปิดแชร์ ICS ของ Win98 โดยที่เราบังคับมัน ไม่ให้มันเป็น 192.168.0.1 คือค่า default ของมัน แต่เราจะให้มันเป็นเลขอื่นแทน (ให้มันออกเป็นเลขอะไรก็ได้ตามที่เราต้องการ) ลองเอาไปประยุกค์ใช้ดูแล้วกันนะครับ (ตามรูปเลย) start > run > regedit >enter แล้วจัดการหาตามหมวดบรรทัดตามรูปเลยนะครับ
Installing ICS using the default values (like: IP-address 192.168.0.1 for the ICS-host) works fine for a home-network, but in an office setup, there is most often already a range of IP-addresses defined, so there is a need to configure ICS to use non-default IP-addresses .
There is no configuration window to define ICS-IP-addresses, changes have to be made directly in the registry, and the ICS-values are stored in:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\ICSharing:
key: IntranetInfo, value: "192.168.0.1,255.255.255.0"
(http://img467.imageshack.us/img467/2767/icscnf013ez.gif)
To change the IP-address of the ICS-host, modify under "Settings\General" the key for "IntranetInfo" (in my example to : 192.168.10.10):
(http://img500.imageshack.us/img500/7190/icscnf027py.gif)
When changing the address of the ICS-host, you also need to change the IP-address for all other systems on the network, so the ICS-DHCP-server must also be configured for a new IP-address range, under the key: "Addressing\Settings":
(http://img496.imageshack.us/img496/5601/icscnf039rd.gif)
In this example, I change the DHCP-range also to 192.168.10.x,
intending to use the addresses 11 to 20.
(http://img504.imageshack.us/img504/7119/icscnf043xe.gif)
lets not forget, that we have to change the
IP-address in the Network configuration.
(http://img516.imageshack.us/img516/5117/icscnf059ky.gif)
ใช้ได้แต่ win98 นะครับ ไม่รู้ me ทำได้แบบนี้รึเปล่านะครับ ส่วน 2000-xp ผมลองหาแล้วยังทำไม่ได้ครับ (ลองเอาไปประยุกค์ใช้งานกันดูนะครับ)
-
เราใช้ wingate 6.1.0 สามารถ monitor client ว่าติดต่อเน็ตไปที่ server ไหนบ้าง , block load ได้ กำหนด bandwidth , block client ได้
-
คุณ jasda2003 สำหรับ Win XP ทำได้ไหมคับ ใครทำได้ช่วยสอนทีคับ
.............ขอบคุณคับ..........
-
โหไม่ได้เล่นนานแล้ว98 จาลองลงดู ขอบคุณครับ ::)
-
เยี่ยมครับ...กำลังรออยู่พอดี...ขอบคุณมากๆ :) ;)
-
แล้ว ICS ใน winXP เปลี่ยน IP ที่ Lan card แล้ว ทำไมมันไม่แจก IP ให้ Client ล่ะ
เข้า registry(ของ xp) ตามที่บอกไม่เห็นมีนะ น่าจะมีเฉพาะใน win98 เท่านั้น
บอกด้วย เปลี่ยนไอพี แล้ว ทำไมมันไม่แจก IP (ใน xp pro นะ)